Today i only worked on the wiring for about 3.5 to 4 hours. I just can’t fall asleep until 2 am at least anymore haha.
Still, i finished the drivers side part of the under dash harness! I’ve moved the Wiper Amp inside to under the dash so there is minimal stuff in the bay. Also incorporated the BMC wiring and shock tower ground into the same harness. I didn’t sleeve anything because, well, the lengths were so short it didn’t seem worth it to me. Plus it’s going to be under the dash. All of this is labeled in the picture below.
This next pictures show kind of how the wiring is routed. I just realized how nasty my brake booster looks in this bay from the next two pictures haha. Going to have to take that out and paint it… white or black? white??
And below is what i have left to do….. YUCK!!!
House of the 450sx 
You would happen to have a diagram for connecting the vh45 harness to the s13 would you? I cannot find squat on the net.
LikeLike
I believe i might. I'll try and find it for you. But since i'm re-doing my harness i can try and amrk everything i did to make it work. Mind you right now its the bare essentials for it to run. Like i don't have the diagnostic plug wired in yet, but will eventually.
I'm not sure when i'll get around to it as i've been really busy lately but i'll definitely try and make a miniature guide for you.
LikeLike
I found a conversion diagram a guy posted to NICO a while ago for the VH to s13.
If you want i can give you that.
LikeLike